9-3SS/SC 2.8T V6 06′ on DO88 Performance Inlet Pipe Kit

Description

Performance Aluminium Intake Pipe and Silicone Hose Kit

To Fit: SAAB 9-3SS/SC 2006 onwards all 2.8T V6 models (B284)

Do88 strive to get the absolute maximum performance gain from this kit by using all of the available space from the original position, this results in this inlet pipe being almost too big for the vehicle. This means a good degree of persistence, persuasion and mechanical competency is required for fitting the kit! 

NB: On facelift cars MY 2007 onwards, the radiator support may need some adapting. See instructions.

This upgrade kit offers a significant improvement over the original parts and is equally suited for someone wishing to replace a failed pipe on a standard engine or to achieve the highest possible horsepower from their tuned engine whilst retaining reliability. Do88’s turbo inlet pipe has better air flow than the stock pipe and this is verified by the results of the SuperFlow SF-1020 flow bench test. The turbo intake pipe is 89mm (3,5 inch), outer diameter, all the way to eliminate all restrictions.

Do88 turbo inlet pipe has an air flow at 0,125bar/1,81psi pressure drop 590CFM, compared to the OEM pipe that has 535CFM.

The turbo inlet pipe is manufactured in 3,5” mandrel bent seamless aluminium pipe.

Custom made high quality silicone hoses with 4 layers of polyester reinforcement and steel wire. These hoses can handle very high temperature and vacuum!

This kit is supplied with all the necessary hardware for installation.

Included in the kit:

• 3.5 inch Aluminium Turbo Inlet Pipe
• Installation hardware for the Inlet Pipe
• Silicone Hoses
• Stainless Steel Clamps

Equivalent to Saab part numbers: 12790714, 12790715 (ref only)

Ref: IR-100B, IR-100S, IR-100R