Filter Parts By Car Marque
main image
Click to enlarge

Our Price: £4,528.90

Share on social media

DO88 991.2 Big Pack Including Inlet Hoses

To fit:

  • 991 Gen 2 Turbo and Turbo S 2015 onwards

A true performance cooling upgrade  for the 991 Turbo / Turbo S

This is the most refined of all products we carry today! -

  • Significantly improved Air flow! (see graph images).
  • Cooler air to your engine!
  • High quality high density UK made motorsport cores.
  • 3D freeform designed cast end tanks
  • Custom designed carbon fiber ambient air guides.
  • Comes with high quality silicone hoses and accessories for installation.

About the intercoolers: Right from the beginning we realised that we could not sacrifice anything to keep the cost down we just had to do the best possible in the space available in the car!

First of all we made a lot of investigation and comparisons between different core types and at last really fell for a high density motorsport core which have great cooling efficiency along with a low weight.

With a great core in place we started to refine the end tank design which brought us to a decision to make cast end tanks as we could then control the air flow distribution over the core in a very precise way. This is very important as a good tank design will be beneficial for both pressure drop and cooling efficiency.

To be able to fit an intercooler with appropriate thickness for the job it was also necessary to design a new upper ambient air guide. This was designed in our 3D scanned environment to ensure perfect fit to the vehicle integrated air guides and our intercooler.

To achieve the best air flow distribution over the core we made intercooler end tanks with 70 mm (2 3/4 inch) connections which then made it necessary to design custom silicone hoses for all positions. The hoses are 3D designed with airflow in mind where we CFD tested each hose during development to ensure best possible flow rate of all parts! The hoses between turbocharger and intercooler are special silicone hoses that can withstand up to 240°C (464°F) continuous temperature!

Another important aspect for cooling performance are to use all ambient cooling air available, to optimise this part we include air block rubber seals for all surfaces where the ambient air guides must seal properly.

Using this design in building our intercoolers the weight increase compared to the OEM ones is relatively small considering the size of our intercooler and that its all made of aluminium. Our intercooler weight is 5,4 kg (11,9 lb) per piece and the 991 OEM intercooler weights 3,1 kg (6,8 lb) per piece. It might sound like a big weight increase but compared to other actors on the market with intercoolers in this size it's a low weight! 

At the same time as our intercoolers lower the intake temperature, they also flow better than the 991 original intercoolers! Please have a look at the air flow rates at different pressure drops in the graph below where we compared our intercooler with hoses to the original intercooler with hoses in our own Superflow SF-1020 Probench to verify the final result!

Keep in mind that the OEM intercoolers was designed for only the power level the car was built for originally. A power increase may cause your stock intercoolers to not be efficient enough. So even on an engine with a software tune only or using your car in hot climate the do88 performance intercooler kit will give a performance increase over the OEM intercoolers!

This do88 performance intercooler kit comes as a complete package with all parts necessary for installation.

Please Note! Some modifications need to be done when installing this intercooler kit, please read step 29,31 & 35 in the installation guide before placing order (opens on, right click on link , select 'open in new tab')

Product Update 01/2022

An opportunity emerged and after thorough testing, we have chosen to change our 991 intercooler core specification. The cores we will use from now on are manufactured by Garrett, and will be of the Bar&Plate type, as opposed to the Tube&Fin we have used this far. Raw data means even better heat transfer properties, paired with even better airflow. This means power. The only downside is a little increase in weight as the Bar&Plate is a more dense construction. However, the significant overall performance gain will justify the weight increase. All other parts such as end tanks, hoses etc. are the same as before.

Key figures with the new MERA version:
•    17°C lower IAT compared to OE intercoolers (40 °C vs 57 °C at 20 °C ambient).
•    37% higher airflow compared to the OE intercooler (with hoses and y-pipe).
•    New, lighter airduct made from real prepreg carbon.
•    3 kg weight increase per intercooler compared to previous do88 intercoolers.

Installation Instruction

About the Y Pipe

Our pipe has both a very good flow rate and a low weight which is accommodated by composing mandrel bent lightweight pipes with a high quality 3D freeform designed cast joint between them. Onto the cast part we then weld CNC-machined connections for bov and breather hoses. This construction technique adds a lot of performance but only a touch of extra weight. The pipes are then finished in a high quality powder coat that makes them look as good as they perform!

When it comes to air flow performance our Y-pipe totally outperforms the OEM Y-pipe by 58% increased flow at the same pressure drop! Be aware of that the OEM parts are only designed for the power level the car was built for originally. A power increase may cause your stock Y pipe to hold back the power of your engine. So even on an engine with a software tune only the do88 performance Y-pipe will give a performance increase over the OEM Y-pipe!

  • Much larger inner diameter for improved air flow, 58 % higher! (see graph images).
  • Made of 2,5" (63mm) mandrel bent aluminium pipes.
  • The pipe has two methanol injection connections (1/8 -27 NPT). The pipe is delivered with blanking plugs in these connections.
  • Smooth flow cast collector part.
  • Smooth internal surface for best air flow.
  • Comes with high quality silicone hoses and accessories for installation. 

About the Inlet Hoses

do88 proudly presents the worlds first high flowing turbo inlet hoses for Porsche 991.1 / 991.2 Turbo. Self developed by do88 in Sweden !

- Much larger overall inner diameter for improved air flow, 31 % higher! (see graph diagram ). The hoses have a 2,5 inch (63mm) inner diameter at the narrowest location.
- Smooth flow transitions.
- Very smooth internal surface for best air flow.
- Excellent thermal properties, the hoses will not absorb heat from the engine.
- The hoses are reinforced with stainless steel wire to eliminate the risk of implosion on high out-takes.

It was a real challenge developing new turbo intake hoses for the 991 Turbo. The lack of space made it really difficult to make a set of hoses that would outflow the stock plastic pipes. We succeeded but in some smaller areas we had to compromise and allow these hoses to have no clearance, so they will push or rub in some non-sensitive areas.

We can ensure you the sensation while driving is very different. The improvement in throttle response is immense, making the car feel so much more refined and alert. This upgrade makes it become what it should have been from the start. This is an improvement no test figures can explain, it has to be perceived behind the wheel of a 991 turbo!

The inlet hose package includes everything for mounting:

  • 2 wire-reinforced silicone hoses
  • 2 silicone hoses
  • 2 breather valves
  • 2 CNC machined VTG adapters
  • Clamps and Screws

This product is available in 2 options, OEM Porsche turbos or with 51.5mm turbo adapters for cars where the compressor wheel has been replaced, and compressor housing machined larger.
Please select your turbo type below.

Equivalent Porsche OEM part numbers 99111063972, 99111063973, 99111064072, 99111064073, 99111007070, 99111064672, 99711064773KLO (for cross reference only)

Do88 part number BIG-200SV-GEN2-179

Convert currencies
PFS Parts Ltd.
Unit 8 - Saxon Court,
Bradfield Close,
Finedon Road Ind. Est,
NN8 4RQ,
United Kingdom
Tel: +44 (0)333 577 9961Calls to 03 numbers cost no more than a national rate call to an 01 or 02 number and must count towards any inclusive minutes in the same way as 01 and 02 calls. These rules apply to calls from any type of line including mobile, BT, other fixed line or payphone. During business hours emails are responded to promptly at no cost. Further details regarding 03 numbers available here.


Fax: +44 (0)844 800 2740

Secure Payment
We accept

PFS Parts Ltd. is a specialist parts company established in 2003. PFS Parts began as a Saab & Volvo parts supplier, but now also offers parts for other marques, as well as offering performance parts for many models via the DO88 perormance product range from Sweden. Click for more about PFS Parts...

Copyright © 2022 DO88 Performance